Have a question?
01977 687 665
Skip to Content
Classeq CP500 Pass Through Dishwasher/ Glasswasher
The CP500 Pass Through range delivers simplicity to high-volume warewashing.
As low as
£4,661.66
£3,884.72
Availability:
In stock
Free Delivery
- Manufacturer: Classeq
- Model No: CP500-CONF
- Delivery: Allow between 1-2 working days *
- Warranty: 2 Years Parts & Labour
Description:
The CP500 Pass Through range delivers more innovation, more performance, and more simplicity where it matters most. All the features you need. None of the hassle you don’t.
Easily configured for straight or corner locations, the CP500 can be commissioned as a dishwasher or glasswasher on site.
As a dishwasher the CP500 can wash up to 720 plates per hour, and up to 1000 glasses per hour as a glasswasher.
As a dishwasher there are four wash programmes, 1.5, 3, 5 and 7 minute wash cycles to choose from, including a new utensil wash programme. As a glasswasher there are two wash programmes, 1.5 and 2 minute wash cycles.
Every CP500 model comes complete with a drain pump, rinse booster pump and detergent and rinse aid pumps as standard.
New Steam Recovery Unit
The new Steam Recovery option minimises the steam released into the kitchen, eliminating the need for extraction and creating a more comfortable workspace.
Better still, the captured heat is reused to preheat incoming water, improving efficiency with every cycle.
Specs:
Capacities & Performance
- Rack/Basket Capacity: (Dishwasher)18 plates, (Glasswasher) 25 glasses
- Wash Programmes: (Dishwasher)1.5, 3, 5 & 7 min. cycles, (Glasswasher) 1.5 & 2 min. cycles
- Theoretical max racks per hour: 40
- Wash temperature: 60°C
- Rinse temperature: (Dishwasher)82°C (85°C on utensil wash programme), (Glasswasher) 70°C
- Water supply connection: 3/4”
- Required water pressure: 2.0 bar
- Required water flow rate: 4 litres/min
- Drain size: Ø40mm
- Drain height – Floor Level: 0-700mm
- Wash pump size: 0.45kW
- Wash tank Capacity: 30 Litres
- Wash tank heating: 2kW
- Rinse Boiler capacity: 9 Litres
- Rinse water Consumption at 2 bar: 3.0 Ltrs
- IP Rating: IP X4
- Operating noise level: <70db
Weights
- Net weight: 130Kg
- Net weight – with Steam Recovery Unit: 160Kg
- Weight (fully loaded): 170Kg - 173 Kg for Intensive Models
- Weight (fully loaded) – with Steam Recovery Unit: 200Kg - 203Kg for Intensive Models
Electrical specification
- Amps required: (Single Phase) 30A, (Three Phase) 12A
- Standard operating voltage: (Single Phase) 220-240V/1N~/50Hz, (Three Phase) 380-415V/3N~/50Hz
- Total connected load: 6.5 kW
Components
- WRAS Compliant - Type AB air gap
- Rinse booster pump
- Built in detergent dispenser
- Built in rinse aid dispenser
- Drain pump
- Temperature interlock
- Integrated Water Softener Optional
