Have a question?
01977 687 665
Skip to Content
In stock
These large and stylish boilers CTSV36T/9 and CTSV135T/18 will cope with the most demanding situations where large volumes are needed in a short period. These 6kW (single phase) and 9kW (three phase) boilers all feature twin taps to speed up delivery.
The following features are excluded from CTSV135T/18
For situations where large volumes are required over a short timescale, there are five twin-tap models to choose from (indicated by a 'T' in the model number). The twin-tap design speeds up delivery and halves serving time.
For customers with a requirement to fill cafetieres, tall jugs or high teapots, Instanta offers a choice of three single-tap and two twin-tap units. All come with high-level draw-off tap(s) that provide a greater clearance for taller vessels (indicated by an 'H' in the model number).
Whichever model is chosen, the CPF Series represents the ultimate in commercial, automatic fill water boilers.
Designed for direct connection to a possible cold water supply using the 1.5 metre (3/4" BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear or front overflow.
Easy to install on a stable worktop.
The CTSV45T/6 should be connected to a 230 volt supply with a suitable break capacity of 30amps. The CTSV36T/9, CTSV50T/9 and CTSV135T/18 are all 9kW and require a 400volt, three phase supply.
CTSV36T/9 | |
Dimensions | |
Height (mm) | 608 |
Width (mm) | 440 |
Depth (mm) | 555 |
Depth excluding Drip Tray (mm) | 380 |
Tap Clearance to Drip Tray (mm) | 165 |
Rear Connection Clearance (mm) | 45 |
Technical Data | |
Power Loading (kW) | 9 |
Heat-up Time (mins) | 23 |
Recovery Rate (Litres) | 1.4 |
Stand-by Power (kW/h) | 0.17 |
Rapid Draw-Off (Litres) | 36 |
Rapid Draw-Off (Cups) | 216 |
Hourly Output (Litres) | 85 |
Hourly Output (Cups) | 500 |